California customers can get faster delivery by ordering from

Orka w/ Touring Case

ITEM # OR-0174 Categories: | |

The Orka/Case is a 9000 W, 3 x 230V with neutral 50Hz water based fog generator, installed in a wheeled touring/road case. The case includes a high powered fan, used to move and dissipate large amounts of fog. Currently, it is the most powerful machine available on the market. Due to it’s power and output, large halls and stadiums can be filled by the Orka/Case.

$7,200.00

Related products:

Overview

The Orka/Case is a 9000 W, 3 x 230V with neutral 50Hz water based fog generator, installed in a wheeled touring/road case. The case includes a high powered fan, used to move and dissipate large amounts of fog. Currently, it is the most powerful machine available on the market. Due to it’s power and output, large halls and stadiums can be filled by the Orka/Case.

Features

Control panel
The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt.

Finest adjustments of the output
Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 – 99%. Thus, any desired effect from a tiny fog cloud to the thickest fog can be produced. This enables the Orka to be used in both small and large locations.

DMX 512 as standard
The Orka can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs.
The DMX start address can be adjusted and saved via the control panel.
If an external fan is connected to the machine it can be controlled via DMX as well.

The machine can also be controlled with analog (0 – 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLR- plugs. A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run. Therefore a permanent pressing of the start button is unnecessary.

Internal timer
With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %.

Road Case mounted internal fan
A DMX adjustable internal fan is installed in Orka case.

Safety

  • The Orka is equipped with new safety features.
  • On the front and the back part of the cover there are fixing points for safety bonds.
  • At both sides of the bottom of the machine are three wholes to which a hanging yoke complete with a collecting tray for fluid drips can be fixed.

Fluid

The following Look-fog fluids are available for the Orka:

Manual | Download
Specsheet | Download
Fluid MSDS | Download
Fluid Consumption | View Chart
Radio Remote Instructions | Download

Additional information

Weight 132 lbs
Dimensions 32 × 24 × 34 in
Power Supply

230V (special order), Touring 230V (with flight case) (+ $500.00)

Related products: