Fog Fluid Pumping Station!

Supply several fog generators with liquid.

PS_Image

The Fog Fluid Pumping Station can supply fog fluid to up to 32 connected haze or fog generators, at heights of up to 15 m.

Each machine must be equipped with a special Fluid Reservoir, which can be easily connected to any Look machine via the standard fluid coupling.

For the Viper NT and Viper 2.6, the Fluid Reservoir comes with a modified tank bracket for connecting directly to the machine, otherwise the Fluid Reservoir is equipped with a hanging yoke for mounting beside or above the machine.

The Reservoirs have capacity for an adequate amount of fluid for creating steady fog or haze, and will be refilled automatically from the Pumping Station when necessary, so that the connected machines will never run dry.

The system is equipped with mechanical protection to prevent overfilling of the Fluid Reservoirs. The system is also equipped with programmable max. run time which will disable the pump in case of fluid tube leakage. (see section 2.5.4 part 3).

Electronic sensors can also be connected

Case for installing the pumping station at the wall

Microcontroller controlled, big LCD

Useable for up to 15 m height

Lengths of the tubes between the machines (respectively amount of connected machines – max. 32) depends on height and diameter (Ø typ. 10 mm)

Activity schedule adjustable

DMX (1 channel on/off)

RDM (status message, sensor value)

Leakage alarm and automatic switch-off

Sensor bus to control the fluid reservoirs as an option

110 V – 230 V, Powercon, 80 Watt

Download Pumping Station PDF